Elecraft Important Firmware Updates   February 26th, 2014

The following is an announcement from Elecraft USA.

The K3, KPA500, and KAT500 all have new beta firmware releases available. All three must be updated to take advantage of these major improvements to the KAT500 and KPA500. All known problems with unwanted re-tuning and faults have been fixed.
We’ve also added a new feature that allows the KAT500’s network settings to automatically track the K3’s VFO frequency. The K3 will send frequency information over the K3’s AUXBUS line, and the KAT500 will select previously memorized tuner settings as you move across the band, or when you “point and shoot” to work a packet spot.
If you have any difficulty with the instructions below, please post a question to the Elecraft list, or contact customer support.

Submitted by Peter Waters G3OJV

This entry was posted on Wednesday, February 26th, 2014 at 12:39 pm and is filed under News. You can follow any responses to this entry through the RSS 2.0 feed.You can skip to the end and leave a response. Pinging is currently not allowed.

No Responses

Leave a Reply